Shure SM7B Dynamic Mic + Monacor MS-15 Adjustable Microphone Arm

Availability: More than 30 in stock

Order now, and this can be delivered by: Thursday, December 02

SKU
423888
  • Designed for vocalists, voiceover artists, streamers, podcasters and more. This kit will provide you with everything you'll need to get started recording vocals.
  • The SM7B is a selectable frequency response microphone that delivers warm and smooth audio in close-proximity studio and vocal applications.
  • Optimized shielding from the external electromagnetic hum, along with internal shock mounting, external windscreens and adjustable bass roll-off and mid-range emphasis response settings provide clean, consistent reproduction.
  • The Monacor MS-15 Adjustable Microphone Arm is a swivel arm microphone stand to mount on your desk.
Our price £385.00 £320.83
- +

Shure SM7B Dynamic Mic + Monacor MS-15 Adjustable Microphone Arm


Shure SM7B Dynamic Microphone

The SM7B is a selectable frequency response microphone that delivers warm and smooth audio in close-proximity studio and vocal applications. Optimized shielding from the external electromagnetic hum, along with internal shock mounting, external windscreens and adjustable bass roll-off and mid-range emphasis response settings provide clean, consistent reproduction.

 

Features:

  • Flat, wide-range frequency response for exceptionally clean and natural reproduction of both music and speech
  • Bass roll-off and mid-range emphasis (presence boost) controls with graphic display of response setting
  • Improved rejection of electromagnetic hum, optimized for shielding against broadband interference emitted by computer monitors
  • Internal “air suspension” shock isolation virtually eliminates mechanical noise transmission
  • A highly effective pop filter eliminates the need for any add-on protection against explosive breath sounds, even for close-up vocals or narration
  • Now shipping with the A7WS detachable windscreen, designed to reduce plosive sounds and gives a warmer tone for close-talk vocals
  • Yoke mounting with captive stand nut for easy mounting and dismounting provides precise control of microphone position
  • Classic cardioid polar pattern, uniform with frequency and symmetrical about axis, to provide maximum rejection and minimum colouration of
  • off-axis sound
  • Rugged construction and excellent cartridge protection for outstanding reliability

 

Specifications:

  • Type: Dynamic
  • Frequency Response: 50 to 20,000 Hz
  • Polar Pattern: Cardioid
  • Electromagnetic Hum Sensitivity (Typical, Equivalent SPL/milliOersted): 60 Hz: 11 dB - 500 Hz: 24 dB - 1 kHz: 33 dB
  • Impedance: 150 ohms for connection to microphone inputs rated at 19 to 300 ohms.
  • Output Level (at 1,000 Hz): Open Circuit Voltage: – 59.0 dB (1.12 mV) - 0 dB = 1 volt per Pascal
  • Switches: Bass roll-off and mid-range emphasis: Slotted response selector switches.
  • Cartridge Shock Mount: Internal air-suspension shock and vibration isolator.
  • Microphone Connector: Three-pin professional audio (XLR)
  • Swivel Assembly: Integrated, captive nut for ease of attachment to stand, fits 5/8 in.–27 thread.
  • Polarity: Positive pressure on the diaphragm produces positive voltage on pin 2 relative to pin 3.
  • Case: Dark grey enamel aluminium and steel case with a dark grey foam windscreen.
  • Sensitivity dBV/Pa: -59.00
  • Sensitivity mvpa: 1.12
  • Impedance (Ω): 150
  • Switchable Low Cut: yes
  • Output Connectors: 3 Pin XLR
  • Attenuation PAD: no
  • Interchangeable Capsule: no
  • Net Weight: 765.4 grams (1 lb, 11 oz)
  • Height (mm) / (in): 198.7 mm / 7.823 in
  • Width (mm) / (in): 117 mm / 4.606 in
  • Depth (mm) / (in): 96 mm / 3.78 in

 

Monacor MS-15 Adjustable Microphone Arm


If you're a vocalist looking for a sturdy, reliable stand for your mic, the Monacor MS-15 has you covered. No matter if you're at home or in the studio, this swivel arm microphone stand is perfect for mounting onto your desk.

 

The Monacor MS-15 Adjustable Microphone Arm is black lacquered metal and comes supplied with a screw clamp (span width: up to 55 mm) and a mounting base. It can be adjusted as desired due to the 3-joint setup with tension springs and locking screws.

 

Its thread is 16mm (5/8") and has a 5 m connection cable with an XLR inline jack and XLR plug. The length of the arm segments are 460 mm and 500 mm and weighs 1.58 kg.

 

Specifications

  • Description: Boom Microphone Stand
  • Features: Desktop Mounting
  • Colour: Black
  • Material: Metal
  • Length: Leg Segments: 460mm, 500mm
  • Weight: 1.58kg
  • Special Feature: Thread: 16mm (5/8")