Auralex Tubetak Pro Liquid Adhesive
The Auralex Tubetak Pro Liquid Adhesive provides easy bonding to studio surfaces. This super-strong adhesive comes in a tube and applies easily with a standard caulking gun. One tube bonds up to 2.9 square metres (32 square feet) of foam, depending on thickness. Tubetak is guaranteed to not oxidize Auralex Studiofoam products.
Full information on the 2 Auralex adhesives is below:
Auralex Tubetak Pro Liquid / Foamtak Spray Adhesives
Tubetak Pro Liquid Adhesive is a super-strong, water-based adhesive that comes in a tube and applies easily with a standard caulking gun. Provides a permanent bond and 1 tube mounts up to 2.9 square metres (32 square feet) of foam or diffusors, depending on thickness. Auralex guarantees that Tubetak Pro will not oxidise Auralex foam products.
Foamtak Spray Adhesive is the fastest and easiest way to mount Auralex foam products. Unlike Tubetak Pro, which is more permanent and tougher to remove later, Foamtak can be applied lightly so that your foam is removable, or it can be applied heavily for a more permanent bond. Also guaranteed not to oxidise Auralex acoustic foams. Code 461-660.
Not suitable for use with MetroFusors or DST-Rs. Mounts up to 8.7 square metres (96 square feet) per can depending on foam thickness. Code 461-650.