Trojan Heavy Duty Speaker Bracket for PA Speakers 10" to 15"
The Trojan Wall Mounted Speaker Bracket provides the user with every option. The complete arm can be swivelled horizontally through 180 degrees. The speaker angle can be set at between horizontal or angled 10 degrees facing up to 20 degrees facing down in three steps. The 35 mm speaker spigot protrudes from the wall by between 350 mm to 440 mm in 5 lockable steps. This allows speakers to be angled horizontally without their sides or back touching the wall. Each chosen position is held in place by back to back sprung rods which protrude through the locking holes on either side of the square telescopic arms assuring nothing can slip.
The speaker spigot includes a rubber ring and sleeve to prevent the speaker from turning on the spigot through vibration when in use.
This product is serious about safety and weight capacity. It is really heavy duty and looks capable of easily withstanding weights of 100kg. All bolts are secured by locking nuts.
It is secured to the wall by 6x 9.6 mm holes. Finished in Black semi-matte powder coating. A central 9.6 mm hole allows for a safety chain to be attached. This should be attached at all times.