ClearSonic Sorber S1 Panel Dark Grey
ClearSonic Sorber baffles are an easy and effective way to contain sound and control reflections. Sorber baffles are manufactured out of rigid 1.5" thick compressed fibreglass encased in heavy-duty 'trunk cloth'. Sorber panels are available in free-standing or tackable models. All Sorber baffles are Velcro-receptive so they can easily be attached to almost any surface. You can also use Velcro to attach signs or other lightweight items to Sorber quickly and easily.
We make Sorber by inserting a 1.5" thick rigid fibreglass section into a heavy-duty carpet cloth jacket and seal them shut using Velcro. We use fibreglass fill instead of less expensive materials because of its fire resistance and superior acoustic properties. Sorber baffles don't just redirect sound - they absorb it! Sorber's NRC ratings are greater than 90% and outperform our competitors' 2" thick products!
All Sorber products have a Class A fire rating. To be considered 'Class A', a product must have a Flame Spread of less than 25 and a Smoke Developed Index rating of less than 450. Sorber products have a Flame Spread index of 0 and a Smoke Developed index of 65. Testing was performed by Omega Point Lab using the ASTM E84 Test Standard.
Sorber S1, S2, and S3 baffles can be attached to the inside of the ClearSonic Panel to reduce the amount of reflected sound, or attached to a wall to improve acoustics in a room. The S1, S2, and S3 are velcro-receptive and easily attached to almost any flat surface.
The S1 is 16.25"H x 22"W.
The S2 is 24"H x 22"W.
The S3 is 33"H x 22"W.
The 22" width allows the panels to fit the ClearSonic A3, A4, and A5 panel systems.
S3 Baffles can be used in IsoPacs in place of S2s for greater absorption.