Wall Box 16+8 Way XLR D Type
WALLBOX / STAGEBOX Studiospares boxes, the most cost effective stage box available. Pre-drilled for cable snakes or wall mounting. All versions are of steel 1.4mm thick, of substantial construction and smart appearance. No unsightly mounting holes. The boxes are in two parts, a U shaped back plate and a front U shaped section on to which the sockets are attached. By first mounting the back plate on the wall, problems of alignment, access to the mounting holes, wiring access etc are totally eliminated. Once mounted, the front panel can be screwed to the back plate. Finish Black stove enamelling for maximum durability. The rear section includes four 6mm holes for wall fixing. 25 mm and holes for cable entry are located on the back and lower edge of the socket panel.
Dimensions 265mm Wide x 170mm High x 45mm Deep. The 8+4, 16+8 and 24 versions have an extra 38mm cable entry hole on the rear and lower side.
The boxes have pre-drilled D Type holes that can accommodate any standard D Type Chassis, this is an ideal adaptable solution for whatever combination of inputs or outputs you require, be it jack, XLR, phono, BNC, Firewire, phono, speakon, USB or RJ45, The boxes come supplied with 4 pozi screws to secure the box together.
Additional screws (code 401561) are required for attaching D Type sockets.
24 x D Type hole version - Code 405-730
8 x D Type hole + 4 Jack socket holes (11mm) - Code 401561
4 x D Type hole - Code 403040
2 x D Type hole - Code 403030
1 x D Type hole - Code 403020
See associated products below for suitable glands and D Type connectors.