Trojan 8U Rack Case Bundle
The Trojan 8u Rack Case Bundle provides you with everything you need to make yourself the ultimate live rack.
Trojan 8U Shock Mount Case – x1
Shock mount cases are designed to protect rack equipment from extreme falls, offering another level of security for your most expensive equipment. The case is constructed from a 9mm plywood and has a sprung frame, using foam to absorb the force on impact. The corners are stackable chrome-plated steel balls and provide extra protection and convenience. The industry-grade chrome butterfly catches are recessed and riveted to the case at ten points, keeping the lids closed to prevent moisture and debris from entering.
This 8U version of the shock mount case includes a pack of screws, washers and caged nuts for easy installation of your studio equipment and outboard gear.
- Internal - Height: 360mm, Depth (front rail to back rail): 482mm, Width: 500mm
- External - Height: 466mm, Depth (with lids): 698mm, Depth (without lids): 518mm, Width 605mm
19-inch 6-Way Rackmount Mains PDU 1U – x1
Tough 6-way outlet with fixing lugs on each end to fit into a rock.
1U 6-way Horizontal 13A switched PDU with Surge protection for any 19" rack system. The inclusion of Metal Oxide Semiconductor surge protection components is a sensible way to ensure unwanted spikes do not corrupt CPUs or generate clicks in audio equipment. Absorbs a maximum surge of 4500 Amps. Status LED confirms protection is ON.
A Delta network gives protection against RFI going in or out of the sockets. New Slimline 1U High-Density design (bear in mind UK plugs are over 1U High) features Earth-Stud to attach your equipment. Lead length 2 metres. Colour Black.
Studiospares XLR Rack Panel Male x12 XLRs – x1
12 XLR male connectors pre-mounted on a Black 1U steel panel. All the sockets are numbered. All connectors have diecast chassis. Contact surfaces are nickel-plated on sprung copper. It will last a lifetime.
Rack Drawer Unit 2U – x1
A Rack Mounted Drawer Unit extends smoothly on ball-bearing runners, the drawer extends to allow 430mm of access out of 455mm full depth (total length when extended: 890mm). The drawer snaps shut and can be locked by fitting the key locking assembly in place of the existing blanking bung. The approximate usable internal height is 75mm. Finished in a scratch retardant matt Black epoxy coating and manufactured to British Standard BS5954.
Speakloc Chassis 4-Pole – x6
4-pin loudspeaker socket with absolute reliability backed up by a lifetime guarantee. High current capability with little contact resistance - precisely what you want from a socket.
Precision XLR Female Chassis Black D Type – x2
Manufactured from a die-cast Zinc shell designed to fit the universal D type cut-out.
Contacts from Nickle plated phosphor bronze for assured long term reliability. Rear terminals are solder buckets that take solder easily. A barrier between the solder buckets and contacts stops molten solder from blocking the contacts. An earth tag provides sufficient grounding.
Contacts are numbered 1,2 and 3. Mounting holes are countersunk for M3 screws and manufactured in accordance with ISO 9001.