TritonAudio Phantom Blocker

Availability: Backorder

SKU
314080
  • TritonAudio Phantom Blocker, blocks Phantom power while leaving the audio signal intact.
  • A great solution to protect the output of any device connected to the XLR input of a mixing desk or preamp.
  • Phantom power can be applied to either the male or the female side of Phantom Blocker's XLR connector.
  • It won't reach the opposing XLR connector, the audio signal travels without restriction in both directions.
Our price £37.00

Inc VAT

- +
Or
Loading payment button...

Triton Audio Phantom Blocker


Phantom power can be applied to either the male or the female side of Phantom Blocker's XLR connector and will not reach the opposing XLR connector, the audio signal travels without restriction in both directions.

 

Applications:

Microphone preamps

Some (older) preamps are sensitive to Phantom power at the input. The preamp's input transformer cannot handle Phantom power from another source. The transformer's thin silk isolations can burn out because a burst of Phantom power switching on creates a high voltage in the input transformer, to prevent this a complete blocking is needed.

Unbalanced TRS to XLR cables

When connecting an unbalanced TRS to XLR cable pin 3 of the XLR connector is directly connected to the ground, creating a short, which can damage input transformers and under-dimensioned phantom power circuits.

Balanced device outputs

Phantom blocker is a great solution to protect the output of any device connected to the XLR input of a mixing desk or preamp which has Phantom power switched on, e.g. your computers audio interface.

Microphones

There are microphones (mainly Ribbon microphones) that do not tolerate Phantom power, to protect your Ribbon microphone against Phantom power we advise FetHead. Connecting a ribbon microphone to a cable which has Phantom power applied sends a rush of current through the microphones' transformer, this current gets amplified by the transformer into the primary circuit of the microphone and forces the ribbon out of the magnetic field it is suspended in, this can permanently stretch the ribbon.

Specification
IP67 No