TritonAudio FetHead Filter

Availability: 6 in stock

Order now, and this can be delivered by: Wednesday, April 17

SKU
314010
  • TritonAudio FetHead Filter, boost your ribbon or dynamic microphone.
  • This model has a high-pass filter to remove low-frequency rumble.
  • Features a built-in 6dB/octave high pass filter with a corner frequency of 220Hz.
  • Specially designed for microphones that exhibit an excessive proximity effect / low-frequency response.
Our price £59.00

Inc VAT

- +
Or
Loading payment button...

Videos

Video thumbnail

TritonAudio FetHead Filter


FetHead Filter

FetHead Filter is a Fethead version with a built-in 6dB/octave high pass filter with a corner frequency of 220Hz. It is specially designed for microphones that exhibit an excessive proximity effect / low-frequency response, like long motor ribbon microphones. The components which make up the filter are not directly in the signal path but are applied to the components which set the gain of FetHead Filters amplifier, thus making it frequency-dependent. This way the sonic character which makes a FetHead attractive to the ear is preserved.

 

Philosophy

Inspired by the positive results of the BigAmp we wondered if a phantom powered, high-quality preamp preceding the microphone cable could improve the sound quality of a ribbon or dynamic microphone, the results were more than convincing. Enter FetHead, our latest innovation in phantom-powered preamp design. While testing FetHead we noticed an overall increase of sound quality and a change of tonal character of the attached dynamic microphone towards a more open, controlled sound.

 

Which microphones benefit

In short, we noticed an improvement on all tested dynamic microphones. A Shure SM57 or SM58 for instance sounds more responsive over a broader frequency range. When mated with a high-end dynamic microphone like a Sennheiser MD441, or Shure SM7 FetHead really shines. Ribbon microphones benefit greatly too because of a much better impedance match, which lessens the load on the microphone, thus giving it better transient response characteristics. FetHeads high quality, low noise signal amplification also extends the usable range of a ribbon microphone, by making it more suitable for recording softer passages without introducing noise.

 

Protects the microphone

Some ribbon microphones do not tolerate phantom power, FetHead's circuit uses Phantom power but shields it from its input (and the microphone's output), as a result, it offers effective protection to the microphone.

 

Low Noise

Fethead uses low noise jfets configured as a double class A amplifier. Jfet's are among the quietest amplifying elements available today. The calculated noise figure of the FetHead based on the jfet's datasheet is lower than we are able to measure.

 

How it Works

Attach FetHead onto a balanced microphone cable and plug it in a dynamic microphone, switch on phantom power and enjoy FetHeads Natural open sound!

 

Key Features

  • Ultra low noise Class A JFet amplifier
  • 20db amplification (@ 1000 ohm load)
  • double single-ended amplifier topology
  • Balanced output
  • Lots of headroom
  • Z-in 22k
  • 18-48 v phantom power