Seiwin 6A Studio Monitors & Monitor Stands
The Seiwin powered speakers are designed for studio use. Constructed from solid 17mm medium density fibreboard and with a rear-facing bass port. The cabinet is black veneered for an appealing finish.
The magnetically shielded drivers were selected for quality, not price. The 6" bass driver has a mineral-filled polypropylene cone with a high-temperature voice coil and damped rubber surround. Such free movement allows the driver to move substantial amounts of air without distortion.
On the rear panel is a volume controls together with an on/off switch and mains an input socket. There is an LED below the bass driver to indicate that the power is on. Each speaker is totally self-contained.
The overall sound is superb, partly due to the quality of the drivers and partly due to the matching of the amps to the speakers and cabinet.
Triangle Base Monitor Stands
A well-engineered stand designed to support studio monitors. The top plate has wide rubber strips to grip the monitor. The height can be adjusted between 900mm - 1400mm. A safety locking pin passes through the upper telescopic pole to protect the speaker from damage should the clutch adjustment mechanism not be properly tightened. The base is triangular, each side is 440mm long, allowing the stand to support heavier studio monitors.
The stand is able to meet various requirements as it can be fitted into tight spaces as well as used on different types of surfaces. In addition, the stand is sturdy and lightweight which makes it easily portable.
Top plate dimensions are 230mm by 230mm.