Studiospares S2000 Condenser Microphone
The Studiospares S2000 is a high specification multi-pattern condenser mic. With 3 polar patterns, a -10dB pad switch and low-frequency roll-off switch, this allows you to be covered for whatever recording application you find yourself in whether it be in the studio or a live setting.
The S2000 features a dual capsule design with back to back 35mm gold capsules that operate via a VPM (Voltage Phase Matrix). This microphone features 3 polar patterns cardioid, figure 8 and Omni. This will provide you with unlimited versatility as whatever recording situation you find yourself in, the option of 3 polar patterns means you'll capture every harmonic detail with the best authenticity.
The capsules inside the S2000 are pre-aged the ensure they retain their tight tolerances for the entire time you own the microphone not just for the first few weeks. Further more, these capsules are polarised by an elevated voltage which increases the output but keeps the noise to a minimum, as not in impure your recordings.
Internally the S2000 is manufactured with a pair of JFET preamps. The junction field-effect transistor preamps offer high input impedance with super low noise figures. This allows you to capture sound sources with the lowest noise platform and a wide overload margin. Resulting in the S2000 being able to perform without any comprise in any situation find yourself in.
The Studiospares S2000 features a -10dB attenuator to deal with any signal that is a little too hot for the console, you have the option to lower the signal at the source. In addition, the S2000 has a low-frequency roll-off, great for you need to remove those low frequencies that aren’t part of what’s needed to be recorded, like mic stand rumble for example.
Additionally, the S2000 comes complete with an included foam windshield to suppress any wind noise. Alongside an elastic suspension, the ultimate answer to mount the mic as it will isolate any floor noise such as mic stand bumps from the recording source.
Frequency Range: 20Hz - 20 kHz
Sensitivity: -37dB +/- 2dB (0dB = 1V/Pa @1kHz)
Output Impedance: ≤ 200 ohms
Max SPL: 125dB for 0.5% THD
S/N Ratio: 76 dB
Power: 48v phantom power
Polar Patterns: Cardioid, Figure-of-8, Omni