Studiospares iPA500 PA System

Availability: 14 in stock

The IPA500 is perfect sound solution for every venue. With built in multi-FX, this system which both portable and powerful will transform your sound.
£349.00 £299.00 £249.17 Save 14%
- +

Studiospares Trojan iPA500

The iPA500 is the perfect sound solution for every situation and venue. It is both highly portable and powerful and will satisfy the most critical user.

Simply holding the Amplifier section provides an insight into the iPA500’s build quality. Solid and highly practical. It packs an incredible amount of facilities and power into two portable cabinets. 


PLEASE NOTE Speaker Stands are not included!


Main benefits are:

1. Quick setup time

2. Versatility, covers events from presentations to concerts

3. Go anywhere, do anything. 10 inputs from mics, CD players, Keyboards, Guitars, Mobile devices etc

4. Three Band EQ and a DSP with 16 on board modifiable sound effects

5. Huge Power reserve with Class D Digital Amplifiers

6. Feedback. Active circuitry locates and processes the offending frequency

7. Two powerful speakers distribute sound to every corner of the auditorium

8. Interfaces with any PA microphone and 99% of studio microphones


Quick setup time

Setting up is a breeze. Just unclip the power amplifier from the rear of the speaker cabinet and plug in the leads stored in the rear of the other cabinet. Finally mount the amplifier on a table or the supplied telescopic stand, turn on and play.



The iPA500’s flexibility covers any scenario and more. With 10 inputs and two outputs plus a sub woofer and monitor outputs, it meets any requirement whatever the venue. A dedicated input for two Wireless Microphones adds to the versatility. The Class D Digital Amplifier punches out 400 watts RMS which is true power. (manufacturers frequently provide mythical power outputs forgetting to specify what watts). If you need enough power to fill an auditorium with quality sound then the iPA500 is your answer.


Go anywhere, do anything

Just plug in mics, CD players, keyboards, guitars etc. Switch on and play. Portable devices link in via Wi-Fi for Apple IOS and Android. All 10 inputs include 3 band EQ, DSP Effects and gain control. Mic/Line switches select the correct channel gain structure.


EQ and Effects (DSP Digital Effects Processor)

If the presenters voice needs beefing up or just sounds wrong the ±15dB three band EQ facility on every input saves the day. Tweak the guitar input for the best sound, add more treble if the CD player sound dull and add more mid band to a vocalist to cut through any mix. 16 on board modifiable sound effects act on one or any number of inputs changeing the character of any sound from a touch of reverberation on the voice to a tremolo on a keyboard. Input for an FX Footswitch


Loadza Grunt

The iPA500 is LOUD. A Massive Power reserve with Class D Digital Amplifiers delivering both quality and quantity. This newly developed digital amplifier is highly efficient so remains cool and reliable ready for continual use. 



The hall maybe reverberant, hard surfaces reflect sounds back to the microphone. Sophisticated active circuitry senses the onset of feedback and suppress the offending frequency. Job done!


The Speakers

The heart of any sound system. 10” long throw speaker cones displace masses of air. To keep distortion in check the bass driver features Hi Flux Ferrite Magnets delivering power to spare. The HF Treble Horn carries the high frequencies from 2.5 kHz to 20,000Hz. With a 34mm fluid filled voice coil heat is dissipated ensuring reliability. Dispersion is a massive 60 x 90 degrees, enough to reach all corners of the auditorium. Speakers can be laid in their side for stage monitoring. Convenient side mounting carrying handles makes transportation simple


Which Microphones

The iPA500 is kitted out with masses of gain to capture the quietest sounds from both dynamic and condenser microphones. Condenser/Electret mics require phantom powering. No problem, just push the Phantom Power switch


Different Venues

Crank up the Bass. For musical events added bass response livens up the show. The iPA500 includes a Subwoofer Out for feeding a sub bass amp and woofer. For speech only events, a special Tone Control tailors the frequency response for even greater clarity.


See what is happening

Audio level status with LEDs from -10db up to Limiting at +8dB aids setting the levels for the best sound.


Go Anywhere

The Switch Mode Power supply saves weight, is highly efficient and works on mains voltages between 100 and 240 volts which covers use on board ships and liners


Digital Effects

Ten Digital Sound effects can enhance any presentation or performance. The iPA500 is loaded with effects to enhance any situation. The included effects are Rooms, Halls, Stage, Plate, Drum, Various Echos, Chorus, Flanger, Phaser, Auto Wah and Tremolo.  These effects can be modified by Decay, Delay and Program Rate


Amplifier and Speaker Mounting. 

The amplifier clips into the rear of one of the speaker cabinets, the other speaker houses all the cables. This makes transportation and storage a breeze. Setting up time consists of unlatching the amplifier from one cabinet and retrieving the cable from the rear of the second cabinet. The Amp comes with an all metal mounting bracket so that it can be mounted on the telescopic stand provided.  

Speakers include a 35mm socket for pole mounting



What is in the Box


1x Speaker containing the Power Amplifier

1x Speaker containing a set of speaker leads and mains power lead.

1x Metal bracket for mounting the Power Amplifier on the Stand

1x Telescopic Power Amplifier Stand

1x Instruction Manual




Mic gain -50dB(bal)

Line gain -18dB

Mic impedance MIC1/2 1.2k Ohms-MIC3/4 3k Ohms

Line in impedance Line inputs5/10 10k Ohms

Channel EQ

LF  ±15dB 100Hz

MF ±15dB 2.7kHz

HF ±15dB 10kHz

Amp output power 2x 200W RMS (THD<1%, 4 Ω@1kHz)

THD ≤0.3%(1kHz,90W)

Phantom Power 25 volts

Frequency response 20Hz~20kHz,± 3dB(1W, 4 Ω)

Rated voltage AC 100V~240V/50/60Hz

Weight 4.3kg


Complete system shipping weight including all packaging materials 36kg


Suggested accessories

iPA500R/M Two Hand Held Wireless Mics. No licence necessary Code 250265

Speaker stand. Studiospares PRO PA Aluminium Speaker Stand 1.3m - 2m high Code 648030

Speaker Leads. Extended High Current  10 metres Code 580920

Speaker Leads. Extended High Current  25 metres Code 580930