Schoeps CMH 64 U Handheld Cardioid Mic

Availability: Discontinued

SKU
711670
  • Schoeps CMH 64 U Handheld Cardioid Mic, wired handheld or soloist’s microphone.
  • Built-in protection from plosive sounds and handling noises.
  • Ideal for speech pickup in the studio.
  • The popping effect caused by vocal plosives is substantially reduced by the built-in pop filter.
Our price £1,485.60

Inc VAT

Schoeps CMH 64 U Handheld Cardioid Mic


Overview

The Schoeps CMH is a wired handheld or soloist’s microphone with specialised immunity to plosive noises. Thanks to a well-balanced frequency response the CMH will be ideally suited for speech applications. The directionality and low frequency roll off aids in reducing the risk of feedback. Using the microphone at short distances increases the proportion of direct sound and balances the in-built low frequency roll off with proximity. The popping effect caused by vocal plosives is substantially reduced by the built-in pop filter and is even further reduced by the low frequency roll off of the microphone.

 

Specifications:

  • Pickup pattern: Cardioid
  • Frequency range: 40 Hz - 18 kHz
  • Sensitivity: -37 dB (V/Pa), 14 mV/Pa
  • Equivalent noise level (A-weighted): 15 dB
  • Equivalent noise level (CCIR): 24 dB
  • Signal-to-noise ratio (A-weighted): 79 dB
  • Maximum sound pressure level (THD < 0.5 %): 131 dB-SPL
  • Maximum output voltage: 1 V (0 dBV) with 1 kΩ load
  • Low cut filter: 60 Hz, 12 dB/oct.
  • Minimum recommended load impedance: 1 kΩ
  • Output impedance: 42 Ω
  • Maximum cable length: > 400 m
  • SCHOEPS RFI Shield: Yes
  • Powering standard / Valid range: P48 / >20 V | P12 / >10 V
  • Current consumption: 4 mA (P48) | 8 mA (P12)
  • Common mode rejection ratio (at 1 kHz): > 60 dB
  • Output: XLR-3M, analogue, 1 channel
  • Length: 210 mm
  • Diameter: 37 / 22 mm
  • Weight : 190 g
  • Surface finish: Matte grey / black
Specification
Specifications
  • Pickup pattern: Cardioid
  • Frequency range: 40 Hz - 18 kHz
  • Sensitivity: -37 dB (V/Pa), 14 mV/Pa
  • Equivalent noise level (A-weighted): 15 dB
  • Equivalent noise level (CCIR): 24 dB
  • Signal-to-noise ratio (A-weighted): 79 dB
  • Maximum sound pressure level (THD < 0.5 %): 131 dB-SPL
  • Maximum output voltage: 1 V (0 dBV) with 1 kΩ load
  • Low cut filter: 60 Hz, 12 dB/oct.
  • Minimum recommended load impedance: 1 kΩ
  • Output impedance: 42 Ω
  • Maximum cable length: > 400 m
  • SCHOEPS RFI Shield: Yes
  • Powering standard / Valid range: P48 / >20 V | P12 / >10 V
  • Current consumption: 4 mA (P48) | 8 mA (P12)
  • Common mode rejection ratio (at 1 kHz): > 60 dB
  • Output: XLR-3M, analogue, 1 channel
  • Length: 210 mm
  • Diameter: 37 / 22 mm
  • Weight : 190 g
  • Surface finish: Matte grey / black