RME 12Mic 12-Channel Microphone Preamp ADAT MADI and AVB

Availability: Backorder

SKU
378370
The RME 12Mic is a high-end 12-Channel microphone preamp with ADAT, MADI and AVB networking connectivity, plus a headphone output for direct monitoring.
Our price £2,399.00 £1,999.17
- +

RME 12Mic 12-Channel Microphone Preamp  ADAT, MADI and AVB


RME’s first preamp for audio networks
The RME 12Mic features twelve microphone and line level inputs with digital, no-compromise, studio-quality conversion; remote controllable gains; integrated MADI and AVB connectivity; plus a multitude of additional functionality, designed to make it the perfect companion for any professional recording setup. 


Twelve transparent mic preamps for exceptional conversion performance
The PAD-free microphone input stages have a 75-dB gain range and accept signals of up to +18 dBu. On the conversion side, the extraordinary SNR values show an as-tonishing 121.2 dB(A) on all channels. All twelve front-facing XLR connections accept microphone and line level signals, whilst the first four connections also accept TRS connectors, with switchable high impedance (Hi-Z) for instruments.

 

Plug’n’play - rapid user interaction
Control all device states directly from the front panel with an encoder and buttons for convenient, direct access to all features. RME AVB devices can also be fully remote controlled via a web-interface on any network link (including wirelessly over Wi-Fi), allowing for the rapid creation of gain groups, phantom power switching, and routing of signals to headphones for monitoring. The integrated routing matrix allows for quick routing of any analogue inputs straight to the headphone output, as well as all digital signals and AVB streams. As such, problem-solving of signals, clocking, connectivity or other issues is both simple and straight-forward!

 

SteadyClock FS
In digital audio, the clock frequency is an essential factor, as it creates the correlation between the audio bits and the time reference. Unfortunately, the clock frequency is not always as stable as desired. The AVB Tool offers full SteadyClock FS performance for lowest jitter and highest jitter immunity. Excellent performance in all clock modes and High-Quality Analog Conversion to hear your mix as it is. Digital format conversion in RME products are done without any loss or degradation, and SteadyClock FS ensures your sonic image will never experience degradation. This helps to optimize recordings and mixes because the soundstage has more depth and clarity.


MADI & ADAT for maximum flexibility
Both coaxial and optical (via an SFP module) MADI I/O is available for independent or redundant operation, and can be used for daisy chaining, merging and converting MADI signals at incredibly low latency. 

 

Three optical ADAT outputs provide up to 24 channels of audio at single speed (for example, a combination of micro-phone inputs, MADI signals and AVB signals), or 12 output channels at 96 kHz sampling rate, ensuring compatibility with a wide range of audio interfaces. Additionally, the ADAT ports can also be used to send monitor mixes from the AVB or MADI inputs to existing DACs/headphone amps.

 

 

Single-mode or multi-mode MADI integration

The MADI SFP can be equipped with a single mode transceiver, allowing the device to be easily integrated into any broadcast infrastructure.

 

Two fully redundant network ports

For the first time, RME offers an AVB device with two fully redundant network ports, based on the recommendations of MILAN. The RME AVB Core has meticulously  implemented the IEEE standards for audio-streaming, discovery and control, allowing RME devices to be both discovered and fully controlled by any AVB controller, and making vendor-specific control protocols a thing of the past.

 

Any signal reaching the 12Mic can be routed and streamed over a network with fixed latency and guaran-teed bandwidth - no switch configuration is required!

 

Never miss a Show - Multiple layers of redundancy make the 12Mic a perfect companion for any kind of live sound application.

 

 

Connectivity and Features

  • 1x Phones Output
  • 4x XLR/TRS Mic/Inst/Line
  • 8x XLR Mic/Line
  • 1x Redundant power supplies
  • 1 x World Clock
  • 1x MADI I/O coaxail
  • 3x ADAT Out
  • 1x MADI Optical SFP (optional)
  • 2x Gigabit Ethernet (802.3 compliant)
  • SteadyClock FS
  • USB for firmware & remote control