RODE NT1-A Matched Pair

Availability: Discontinued

SKU
417250
  • RODE NT1-A Matched Pair, has everything you need to get a truly professional vocal recording.
  • Acoustically matched for equal sensitivity from each mic and includes the RODE Matched Pair Certificate of Testing.
  • An industry-standard microphone, delivering the warmth and clarity typically only featured on the most expensive microphones.
  • Featuring the world's quietest studio microphone, a studio-grade pop shield and a shock mount.
  • Premium 20-inch cable, dust cover, an instructional DVD with recording tips, and RODE's industry-leading ten-year warranty.
Our price £419.00

Inc VAT

RODE NT1-A Matched Pair


NT1-A Matched Pair Recording Pack

The RODE NT1-A has become a staple of home recording setups around the world, boasting impressive acoustic performance and warm, crisp capture. The NT1-A is an excellent choice for recording both male and female vocals, along with acoustic instruments such as guitars.

 

The RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones.

 

Now available as the 'Complete Vocal Recording Solution' this NT1-A package now includes everything you need to get truly professional vocal recordings - the world's quietest studio microphone, a studio-grade pop shield and shock mount, a premium 20' cable, dust cover, an instructional DVD with recording tips, and of course RODE's industry-leading ten-year warranty.

 

Key Features:

  • Large 1" (25mm) capsule with gold-plated diaphragm
  • Cardioid polar pattern
  • Self-noise of only 5dB (A)
  • Ultra-low noise, transformerless surface mount circuitry
  • Wide dynamic range
  • Gold-plated output contacts
  • True condenser (externally biased)
  • Internal capsule shock mounting
Specification
Specifications
  • Microphone Response: 20Hz - 20kHz
  • Microphone Maximum SPL: 137dB SPL (@ 1kHz, 1% THD into 1KΩ load)
  • Microphone Impedance: 100 Ohms
  • Microphone Powering: +48 Volts (Phantom Power)
  • On/off Switch: No
  • Microphone Pad Switches: No
  • Microphone Diameter: 50mm
  • Microphone Connector: 3-Pin Male XLR
  • Microphone Dynamic Range: > 132dB (per IEC268-15)
  • Microphone Signal-to-Noise: > 88dB (1kHz; per IEC651, IEC268-15)
  • Self Noise: 5.0 dB(A)
  • Microphone Sensitivity: -31.9dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL), 190.00mmH x 50.00mmW x 50.00mmD
  • Physical Weight: 326.00g