Audio-Technica AT4040 Condenser Mic

Availability: Backorder

SKU
447020
  • Audio-Technica AT4040 Condenser Mic, builds on the legacy of the Audio-Technica 4 series.
  • Features an advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics.
  • The capsule is a genuine externally polarised condenser variety.
  • The gold-sputtered diaphragm has completed an ageing process so long term stability is assured.
  • The response is held within tight limits between 20Hz and 21kHz.
Our price £348.00 £290.00
- +

Audio-Technica AT4040 Condenser Mic


During the early 90s, the Audio-Technica 4 series caused a sensation within the pro recording industry. The performance was equal to or surpassed, the established elite on all counts, and at a fraction of the cost. The 4040 builds on that legacy.

 

The capsule is a genuine externally polarised condenser variety. The gold-sputtered diaphragm has completed an ageing process so long term stability is assured. The response is held within tight limits between 20Hz and 21kHz. The large diameter of the capsule ensures the low-frequency detail is retained which explains why the 4040 is popular with male vocalists.

 

There is a switched 80Hz, 12dB/octave low-frequency roll-off filter and a 10dB attenuation pad to extend the maximum SPL level to 155dB. The typical overall dynamic range is 133dB and the signal to noise ratio is 82dB. Supplied complete with AT8449 shock mount threaded 5/8 inch, protective carrying case and a dust cover. 48volt phantom powering.
More Information
Specifications
  • Microphone Response: 20-20,000 Hz
  • Microphone Maximum SPL: 145 dB
  • Microphone Impedance: 100 ohms
  • Microphone Powering: 48V DC
  • Microphone Connector: Integral 3-pin XLRM-type
  • Microphone Dynamic Range: 133dB
  • Microphone Signal-to-Noise: 82dB
  • Microphone Sensitivity: -32 dB, 170.0mm x 53.4mm
  • Physical Weight: 360g