Lewitt LCT 640 TS Condenser Microphone

Availability: Out of stock

SKU
600070
  • The Lewitt LCT 640 TS Condenser Microphone, certified by the Music and Technology Alliance (MET), excels in recording vocals and stereo drum overheads with its professional FET circuitry. 
  • With exceptional clarity, this microphone captures every nuance of the performance, making it perfect for vocals, stringed instruments, piano, and ASMR recordings. 
  • Enables in-phase stereo recording with a single microphone, offering separate channel outputs for front and back capsule signals. 
  • With five polar patterns, switchable pad, and a roll-off filter, this microphone provides unparalleled versatility. 
  • Capsule can be output on two separate channels making it adaptable to both solo vocals and wide-open rooms, even choirs.   
Our price £725.00

Inc VAT

Lewitt LCT 640 TS Condenser Microphone


The Lewitt LCT 640 TS Condenser Microphone is the ultimate FET studio condenser microphone great for vocals and stereo drum overheads and has been officially certified by the Music and Technology Alliance (MET). 

 

Capture Every Detail 

The LCT 640 TS produces fantastically bright and pristine recordings with professional FET circuitry that allows you to hear every nuance of the performance. The clarity of this microphone makes it the perfect choice for vocals, stringed instruments, piano and even ASMR recordings. 

 

One Mic, Two Channels 

The LCT640 TS allows you to record perfect, in-phase stereo with a single microphone. The signals from the front and back of the capsule can be output on two separate channels making it adaptable to both solo vocals and wide-open rooms, even choirs. 

 

More Freedom 

This condenser microphone gives you all the control you will ever need from a microphone. It has five different polar patterns to help you adjust to any source. A switchable pad that can attenuate up to –18dB for louder performances. A four-step roll off filter that will reduce low end rumble and room noise all the way up to 150 Hz. And the included POLARIZER plug-in allows you to adjust polar patterns in your DAW.

 

Key Features 

  • 1" multi-pattern studio condenser microphone 
  • Full, crisp, and well-balanced sound 
  • Revolutionary Dual Output Mode 
  • POLARIZER plugin to create any pattern after the fact 
  • Stereo capabilities 
Specification
Specifications

Microphone Type:   Condenser, externally polarized

Acoustical operating principle:   Pressure gradient transducer

Diaphragm:   3 micron gold sputtered Mylar

Transducer Ø:   25.4 mm, 1 in

Polar pattern:   Dual Output Mode: create any polar pattern in post-production / Multi-Pattern Mode: Omni, wide cardioid, cardioid, supercardioid, figure-8

Frequency range:   20 - 20,000 Hz

Sensitivity:   31.4 mV/Pa, -30.1 dBV/Pa

Self-noise:   10 dB (A)

Max. SPL for 0.5 % THD:   134 dBSPL, 0 dB attenuation

Signal / noise ratio:   84 dB (A)

Dynamic range:   124 dB (A)

Attenuation:   0 dB
                            -6 dB
                            -12 dB
                            -18 dB

Low-cut filter:    linear 
                               40 Hz (12 dB/oct)
                               80 Hz (12 dB/oct)
                               160 Hz (6 dB/oct)

Internal impedance:   110 Ω

Supply voltage:   48 V ± 4 V

Current consumption:   5.1 mA 

Microphone enclosure:   Zinc die cast

Connector:   Gold plated 3-pin XLR + Mini 3-pin XLR

Microphone dimensions:   158 x 52 x 36 mm

Microphone net weight:   425 g, 14.9  oz