Behringer B-2 Pro Condenser Mic

Availability: No Longer Available in UK, Contact Us For An Alternative

SKU
381100
The B-2 PRO condenser microphone is an affordable, high-quality way to get what you really hear down on tape (or in bits). Thanks to the pressure gradient transducers and shock-mounted 1.0" gold-sputtered dual-diaphragm capsules.
Our price £108.00

Inc VAT

Behringer B-2 Pro Condenser Mic
 


 

The B-2 PRO condenser microphone is an affordable, high-quality way to get what you really hear down on tape (or in bits). Thanks to the pressure gradient transducers and shock-mounted 1.0" gold-sputtered dual-diaphragm capsules, the B-2 PRO mic deliver an open, transparent sound with excellent transient response, with ruler-fl at frequency response from 20 Hz to 20 kHz, and a slight boost in the presence range. The B-2 PRO has three selectable pickup patterns: omni for capturing sound in all directions, cardioid for picking up your source signal while rejecting off -axis sound, and figure eight for picking up only what is directly in front of and behind the microphone’s diaphragm – without any bleed from the sides. Thanks to its exceptional transducers and gold-plated XLR outputs, the B-2 PRO truly delivers on the promise of noise-free transmission, with the utmost transparency.

The B-2 PRO also has a switchable -10 dB attenuator to capture high-volume signal sources without distorting, as well as a low-cut filter to tame ultra-low frequencies.

 

Features

  • Professional 1" gold-spluttered dual diaphragm condenser microphone
  • Selectable cardioid, omnidirectional or figure eight pickup pattern
  • Pressure-gradient transducer
  • Switchable low-frequency roll-off and input attenuation
  • Ultra low-noise transformerless FET input
  • Gold-plated 3-pin XLR output connector
  • 3 year manufacturer warranty

 

Packaging

  • Behringer B-2 Pro condenser microphone
  • Heavy duty suspension mount
  • Windscreen
  • Aluminium transport case
Specification
Specifications Microphone Response :20Hz to 20kHz,
Microphone Maximum SPL : 135 dB (0 dB),
145 dB (-10 dB),
Microphone Impedance : < 200 ohms,
Microphone Powering : +48 volt phantom power,
Microphone Pad Switches : -10 dB (switchable),
Microphone Diameter : 56mm,
Microphone self Noise : 17dB (A weighted),
Microphone Connector : 3-pin XLR male,
Microphone Signal-to-Noise : 76 dB,
A-weighted,
210mm x 56mm,
Physical Weight : 0.520 g