Availability: Backorder
- Avantone CK1 Condenser Pencil Mic, a gorgeous looking and sounding microphone.
- The design, character and performance can be compared directly to fine studio-standard FET mics, but at a fraction of their cost!
- The rugged CK-1 microphone body and capsule assembly are precision machined by Brass.
- Aesthetically the compact body features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and capsule assembly.
- Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability.
Avantone CK1 Condenser Pencil Mic
The Avantone CK-1 FET Pencil Condenser Microphone is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to fine studio-standard FET mics, but at a fraction of their cost! The rugged CK-1 microphone body and capsule assembly are precision machined by Brass. Aesthetically the compact body features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and capsule assembly. Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability.
The CK1 high-quality FET circuitry will yield pleasing professional results comparable to much more expensive designs. Any studio can proudly offer the CK-1 for instrumental and percussion miking. The CK-1 is equally at home on the stage for drum overheads, acoustic instruments and piano. The CK-1 INCLUDES (3) 19mm (3/4") interchangeable capsules (cardioid, Omni, and Hyper-cardioid) to provide unlimited miking possibilities.
The included SSM Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results.
Key Features:
- Output Impedance: <=200 Ohms
- Maximum SPL: 138dB (0.5% THD @1000Hz)
- S/N Ratio re 1Pa: 78dB
- Noise Floor: < 17 dBA
- Output Connector: Male XLR 3 pin
- High-Pass Switch: 80 Hz 6dB/octave
- Attenuation Switch: -10 dB
- Included Accessories: 3 Capsules, Padded Wooden Box and SSM Shockmount
- Power Requirement: Standard 48 Volt Phantom / 5mA
- Finish: Polished Nickel trim / Metallic Cabernet Red Body
- 19mm Cardioid, Omni, and Hyper-Cardioid capsules
- Owner's Manual
- Dimensions: (23mm) x (153mm)
- Weight: 148g
Specifications |
|
---|