Audio-Technica AT4033A/SM Condenser Mic

Availability: Backorder

SKU
404840
  • The side-address AT4033aSM offers low-noise, symmetrical, transformerless circuitry that results in exceptional transient response and clean output signals.
  • The response is unusually between 20Hz and 20kHz.
  • The capsule utilises vapour deposits of pure gold onto a specially contoured large diaphragm, which is then aged through a five-step process to ensure absolute long term stability.
  • The capsule is the more recently developed fixed chargeback plate permanently polarised variety.
  • The design is more tolerant to moisture which can cause low-frequency rumbles on older high voltage polarisation designs.
Our price £340.00 £283.33
- +

Audio-Technica AT4033 Condenser Microphone


The AT4033 has a cardioid pattern which is preferred for 90% of all studio work. The response is unusually between 20Hz and 20kHz. The capsule utilises vapour deposits of pure gold onto a specially contoured large diaphragm, which is then aged through a five-step process to ensure absolute long term stability. The capsule is the more recently developed fixed chargeback plate permanently polarised variety.

 

The design is more tolerant to moisture which can cause low-frequency rumbles on older high voltage polarisation designs. This is a useful consideration when used for vocal recordings where water vapour from the breath can create condensation on the capsule. Sonic integrity is maintained by the inclusion of a transformerless output stage.

 

The 4033 includes a switchable 10dB attenuator and is able to handle SPLs as high as 147dB. Another switch provides bass roll-off below 80Hz to minimise unwanted noises.

 

Includes Shock-Mount:

More Information
Specifications
  • Microphone Response: 30-20,000 Hz
  • Microphone Maximum SPL: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
  • Microphone Impedance: 100 ohms
  • Microphone Powering: Phantom Power Requirements: 48V DC, 3.2 mA typical
  • On/Off Switch: No
  • Microphone Pad Switches: No
  • Microphone Diameter: 2.10" (53.4 mm) maximum body diameter
  • Microphone Connector: Integral 3-pin XLRM-type
  • Microphone Dynamic Range: 128 dB, 1 kHz at Max SPL
  • Microphone Signal-to-Noise: 77 dB, 1 kHz at 1 Pa
  • Microphone Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa, 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum diameter
  • Physical Weight: 380g
at4033asm (79.94 kB)