Price match offer by Studiospares

Price Match

Excellent support and technical sales team

Excellent Support

We are rated 9.5 on Trustpilot

Rated 9.5 / 10

Free delivery over £149

Free Express Delivery Over £99 (exclusions apply)

Finance options

Finance Options

  1. Home
  2. Studio Gear
  3. Digital Convertors
  4. Sonifex Rb-Sp1 Splitter/Combiner Digital
Alternative Image

Sonifex Rb-Sp1 Splitter/Combiner Digital

Product Code: 368160

SONIFEX RB-SP1 DIGITAL SPLITTER + COMBINER The RB-SP1 Digital Splitter & Combiner is a 1U rack-m...

£549.00 (INC VAT)
Quantity
Not in stock, but available to order
Add to Basket Add to Wishlist Print
Email Me When Back In Stock
Check out Finance Options here

Delivery Icon

Price Match

We'll match or beat any price

Price Icon

Free Delivery

On Orders over £99 (INC VAT)

  • Description
  • Specifications
  • Reviews
SONIFEX RB-SP1 DIGITAL SPLITTER + COMBINER The RB-SP1 Digital Splitter & Combiner is a 1U rack-mount unit used to interface various double sampling pieces of equipment. Some older equipment uses 2 AES/EBU connectors for double sampling with each connector carrying an audio signal at a normal frame rate, whilst other equipment has a single connector using twice the frame rate. The RB-SP1 can interface between them, either combining the signals from 2 XLR`s into 1, or splitting the signal from 1 XLR into 2. The RB-SP1 can also be used for interfacing stereo and mono signals to digital mixing desks by splitting the left and right signals of a stereo XLR to two separate XLRs, and vice versa by combining them. Additionally, a sample rate converter on the second digital input can be used to synchronize or convert the sample rate of the secondary input to that of the primary input. The RB-SP1 can handle sample rates up to 96kHz and bit-rates of 16, 20 and 24 bit. Both inputs and outputs can be selected as either AES/EBU or SPDIF.
There are two types of operation : Split 96, and Stereo/Mono. These each have three different switch modes : Split, Combine and Bypass. Split 96 - This is a method that allows older equipment to handle 48kHz double sampled (96kHz) digital signals. To do this, Split 96 uses two digital signals running at 48kHz, where both sub-frames of a single 48kHz stream are used to carry information about a mono signal, with the resultant signal of both 48kHz streams being equivalent to a stereo 96kHz signal. The unit will also perform the same function for 88.2kHz stereo and 44.1kHz double sampled signals. In Split Mode a single stereo 96kHz signal is received into input 1 which is then output as two separate 48kHz signals. In Combine Mode two 48kHz double sampled input signals are combined to create a single 96kHz signal on output 1. Stereo/Mono - This allows a digital stereo signal to be separated into two digital mono signals and vice- versa. In Split Mode a single stereo signal is routed to two mono outputs. In Combine Mode two mono signals are combined to create a single stereo signal. Bypass Mode - In Bypass Mode, input 1 is routed to output 1 and input 2 is routed to output 2. Input 1 is used as a master clock input. If input 2 is set at a different sample rate to input 1 then input 2 is sample rate converted to match input 1. Audio Specification: Input Impedance 110ohms +/-20% balanced (AES/EBU) 75ohms +/-5% unbalanced (SPDIF) Output Impedance 110ohms +/-20% balanced (AES/EBU) 75ohms +/-5% unbalanced (SPDIF) Signal Level 3V/10V peak to peak min/max (AES/EBU) 0.5V 20% peak to peak (SPDIF) Sample Freq Range 30-100kHz (i.e. including 32kHz, 44.1kHz, 48kHz, 64kHz, 88.2kHz and 96kHz) Bit Depth Up to and including 24 bit Sample Frequency Range 30-100kHz (i.e. including 32kHz, 44.1kHz, 48kHz, 64kHz, 88.2kHz and 96kHz) Dynamic Range 120dB Distortion and Noise -114dB THD + N at 1kHz, ref 0dB FS Connections : Audio Inputs 2 x AES/EBU XLR 3 pin female (balanced) 2 x SPDIF RCA phono female (unbalanced) (Input button selects between AES/EBU and SPDIF) Audio Outputs 2 x AES/EBU XLR 3 pin male (balanced) 2 x SPDIF RCA phono female (unbalanced) (Output button selects between AES/EBU and SPDIF) Mains Input Filtered IEC, continuously rated 85-264VAC @ 47-63Hz, 10W max Physical Specification : Weight Nett: 1.6kg Gross: 2.2kg Dimensions Raw: 48cm (W) x 10.8cm (D) x 4.2cm (H) (1U) Boxed: 53cm (W) x 20.5cm (D) x 6cm (H)
Customer Reviews

There are no product reviews for this product, why not submit one?