Price Match

Excellent Support

Rated 9.5 / 10

Free Delivery Over £99 (exclusions apply)

Finance Options

  1. Home
  2. Microphones
  3. Vocal Microphones
  4. Studiospares S945 Dynamic Mic Bundle 2
Alternative Image
Studiospares S945 Dynamic Mic Bundle 2
Alternative Image 1
Alternative Image 2

Studiospares S945 Dynamic Mic Bundle 2

Product Code: 449636

The S945 is a great microphone for vocalists and engineers alike. This microphone is great for live or recorded vocals, but can also be used to capture other instruments.

£32.50 (INC VAT)
QuantityPrice
1£32.50
2+£30.90
Quantity
Stock Expected 14/12/2018.
Add to Basket Add to Wishlist Print
Email Me When Back In Stock
Check out Finance Options here
Delivery Icon

Price Match

We'll match or beat any price

Price Icon

Free Delivery

On Orders over £99 (INC VAT)

  • Description
  • Specifications
  • Reviews
  • Included Products

Studiospares S945 Dynamic Microphone


The Studiospares S945 microphone is an impressive alternative to other handheld vocalist microphones. With a frequency response that is tailored specifically to the human voice, it excels at reproducing speech and vocals.

Dynamic microphones are particularly great with loud sound pressure levels, which means that this microphone could also be used for guitar cabinets or snare drums. Another trait that dynamic microphones are prone to is low sensitivity, so be sure to place this microphone close to the sound source.

The hyper-cardioid polar pattern of this microphone is useful at rejecting off-axis sounds, with an increased sensitivity at the front of the microphone. This is great for live stages, where a small amount of space and a lot of sound reinforcement can cause feedback or spill from other sound sources.
 

Features

• Tailored Frequency Response, an ideal microphone for speech, vocals and other loud instruments.
• Two stage pop blast filter. Easily removed for cleaning
• Capsule soft suspended to stop handling noise
• Silent On/Off Switch
• Hyper-Cardioid Polar Pattern effectively cuts out unwanted side sounds and PA feedback
• Wide frequency range from 55Hz to 17.5kHz captures every sound
• Frequency response is substantially flat so everything captured sounds natural
• Body manufactured from diecast zinc alloy for strength and total shielding
• High maximum SPL can cope with any instrument or voice

 

Near equivalents

Shure SM58LC Switched version Code 423100
Sennheiser e945 Switched version Code 453820
AKG D5CS Switched version Code 469500

 

Included is an XLR Lead and Mic Stand.

XLR Lead
XLRs are die cast and have no screws. The cable is compressed by the chuck principle when the top is tightened. A 64 strand 0.12mm lapped copper screen ensures excellent flexibility and screening. Low DC losses ar ensured by the use of 20 strands of 0.12mm copper wire.

 

Microphone Stand

A full function stand finished in matt black. The boom arm can be removed or set at any length or angle. Height is adjustable between 94cm and 1.75 metres. The boom arm is 50cm long extending to 90cm. The folding legs are 33cm long to provide good stability should a heavy microphone be used with the boom arm fully extended.

 

This microphone will stand direct comparison with any big name product and is sold at a fraction of their price.

 

Specification:

Capsule Dynamic
Polar Pattern Hypercardioid
Frequency Range 45Hz - 15.7kHz
Sensitivity -53dB +/-3dB (ref 0dB=1V/Pa)
Output Impedance 600Ω
Maximum SPL 144dB
 

Economy XLRMa - XLRFe 5m

One of our range of popular economy XLR and jack leads.  XLRs are die cast and have no screws. The cable is compressed by the chuck principle when the top is tightened. A 64 strand x0.12mm lapped copper screen ensures excellent flexibility and screening. Low DC losses ar ensured by the use of 20 strands of 0.12mm copper wire.

 

The Studiospares Microphone Stand

Studiospares Microphone Stand with boom, one of our best ever selling products. A realistically priced microphone stand manufactured to a standard, not a price. It is equally at home in the studio or on stage. This is a full function stand finished in matt black. The boom arm can be removed or set at any length or angle. Height is adjustable between 94cm and 1.75 metres. The boom arm is 50cm long extending to 90cm. The folding legs are 33cm long to provide good stability should a heavy microphone be used with the boom arm fully extended. The end of the boom arm is threaded 5/8" and is supplied with a 5/8" to 3/8" thread adaptor. The thread between the stand upright and boom arm is 3/8". For durability, the base unit and telescopic height adjusting sleeve are metal, not plastic. When tightened, screws do not gouge marks in metalwork. These stands are imported by Studiospares in container loads and sold directly to the end user, hence the highly competitive price. Please note that these are not intended for constant stage use. This stand is also available without the boom arm; Studiospares RED303 Tripod Isolators available for use with this stand -> Mic Stand Bag also available . Buy 6 of these stands for the price of 5 by clicking here!!! Studiospares give 1 to Vision for China's orphanage work for every Studiospares Mic Stand sold . Click here for more info. Help us to help some very needy children; together we can make a difference. Studiospares Mic Stand Spares Unlike some other suppliers, Studiospares support our products by supplying spares for items that may need servicing in the future. The following spares are available - 00> Manufactured to the ISO9002 standard. The design may change slightly without prior notice.

 

Other options:

 

Microphone Capsule: Dynamic
Microphone Response: 50Hz - 15kHz
Microphone Impedance: 600 Ohms
Microphone Maximum SPL: 144dB
Microphone Connector: XLR
Microphone Pad Switches: None
Microphone Powering: None Required
Physical Weight: 0.5kg
Customer Reviews

There are no product reviews for this product, why not submit one?