Price Match

Excellent Support

Rated 9.5 / 10

Free Delivery Over £99 (exclusions apply)

Finance Options

  1. Home
  2. Microphones
  3. Installation Microphones
  4. AKG CHM 99 Ceiling / Hanging Choir Mic White
Alternative Image

AKG CHM 99 Ceiling / Hanging Choir Mic White

Product Code: 469051

There is hardly any more affordable and simpler solution for recording choirs at worship centers...

£109.00 (INC VAT)
QuantityPrice
1£109.00
2+£104.00
Quantity
0 in stock. Please call us for availability.
Add to Basket Add to Wishlist Print
Email Me When Back In Stock
Check out Finance Options here
Delivery Icon

Price Match

We'll match or beat any price

Price Icon

Free Delivery

On Orders over £99 (INC VAT)

  • Description
  • Specifications
  • Reviews

The CHM 99 Condenser Hanging Microphone provides both ease of use and a high level of functionality. There is hardly any more affordable and simpler solution for recording choirs at worship centers. Suspended from the ceiling or a beam, the hanging microphone is aligned and then fixed in the correct position. Now use the spring steel clamp to adjust the correct angle, and off you go!

XY stereo recording

Using two CHM 99 hanging microphones in an XY configuration (coincident pair) is a good way to make stereo recordings, particularly of choirs. However, sound source locations are defined only by intensity differences. Adjusting the angle between the microphones determines the width and depth of the stereo image.

ORTF stereo recording

Developed by the French Broadcasting Authority, this technique differs from the XY technique by recording not only intensity differences, but also delay differences. The capsules are aligned at an angle of precisely 110 and 170 mm / 6.7 in. apart.

Features -

* Cardioid polar pattern
* 10 m (33 ft.) cable
* 125 pickup angle
* Especially suited for choir recordings
* Integrated spring steel clamp for optimum alignment

Polar pattern Cardioid
Frequency range 70 to 18,000 Hz
Sensitivity 18 mV/PA = -35 dBV re 1 V/Pa
Max. SPL 125 dB (for 1% THD)
Equivalent noise level <21 dB-A
Signal/noise ratio (A-weighted) >73 dB
Impedance <=600 ohms
Recommended load impedance >=2,000 ohms
Supply voltage 9 to 52 V phantom power to IEC 61938 (DPA adapter integrated)
Powering <3 mA
Connector 3-pin male XLR
Finish white
Dimensions 13.5 x 55 mm (0.5 x 2.1 in.)
Net weight 20 g (0.7 in.)
Shipping weight 480 g (17 oz.)
Customer Reviews

There are no product reviews for this product, why not submit one?