Price match offer by Studiospares

Price Match

Excellent support and technical sales team

Excellent Support

We are rated 9.5 on Trustpilot

Rated 4.8 / 5

Free delivery over £149

Free Delivery Over £99 (exclusions apply)

Finance options

Finance Options

  1. Home
  2. Microphones
  3. Installation Microphones
  4. AKG C562Cm Miniature Boundary
Alternative Image

AKG C562Cm Miniature Boundary

Product Code: 419890


£155.00 (INC VAT)
Discontinued Product Currently Unavailable Print
Email Me When Back In Stock
Check out Finance Options here

Delivery Icon

Price Match

We'll match or beat any price

Price Icon

Free Delivery

On Orders over £99 (INC VAT)

  • Description
  • Specifications
  • Reviews
  • Downloads
AKG C562CM INSTALLATION BOUNDARY MICROPHONE OMNIDIRECTIONAL Both versions of the C562 offer inherent advantages of boundary layer design: 6dB higher sensitivity and virtual elimination of comb filter effects when installed on reflective surfaces plus extended and flattened frequency response. Both versions are Omni directional in their hemispheres and are therefore essentially insensitive to structurally transmitted noise. A high sensitivity electret condenser capsule provides superior sound noise ratio and extended depth coverage. The miniature C562CM is designed for flush mounting in ceilings, walls, conference tables, stage sets and many more, with an attached cable terminating in a 3.5mm male jack which threads through the mounting hole. An accompanying phantom power adaptor provides electronically balanced low impedance output via an XLR connector. NB The C562BL table top or floor placement version is also available Code 419-880.
Polar pattern omnidirectional (hemispherical) Frequency range 20 to 20,000 Hz Sensitivity 25 mV/Pa (-32 dBV) Max. SPL 130 dB (k=1 %) Equivalent noise level 16 dB-A Signal/noise ratio (A-weighted) 78 dB Impedance 600 ohms Recommended load impedance >2000 ohms Supply voltage 9 to 52 V phantom power to DIN/IEC Current consumption <2 mA Connector 3-pin XLR Cable 0.5 m (20 in.) Finish matte nickel plated Dimensions 20 dia. x 28 mm (0.8 dia. x 1.1 in.) Net weight 30 g (1.1 oz.) Shipping weight 195 g (76.9 oz.)
Microphone Response: 20 Hz to 20 kHz (installed in very large boundary)
Microphone Impedance: ≤ 600 ohms
Microphone Maximum SPL: 130 dB SPL (1% THD)
Microphone Signal-to-Noise: 78 dB
Microphone Sensitivity: 20 mV/Pa (-33 dBV) re 1 V/Pa (measured on 1.5 x 1.5 m boundary)
Microphone Self Noise: 16 dB(A)
Microphone Connector: phantom power adapter with integrated male 3-pin XLR connector
Microphone Diameter: 20 mm
Microphone Powering: 9 to 52 V phantom power to IEC 61938
Physical Height: 0.8 dia. x 0.12 (1.1) in. (20 dia. x 3 (28) mm)
Physical Weight: approx. 1.1 oz. (30 g) (without cable)
Frequency Curve Image:
Customer Reviews

There are no product reviews for this product, why not submit one?

Product Manual
Service Diagram