SE Electronics 4400a Condenser Mic

Availability: Backorder

SKU
422210

The sE 4400a has 4 polar patterns, Cardioid, Hypercardioid, Figure of 8 and Omni. 2 bass cuts at 60Hz and 120Hz; 2 pads at 10 and 20dB.

Our price £348.22 £290.18
- +

SE Electronics 4400a Condenser Mic


The sE 4400a has 4 polar patterns, Cardioid, Hypercardioid, Figure of 8 and Omni. 2 bass cuts at 60Hz and 120Hz; 2 pads at 10 and 20dB. The chassis is small very small, but still manages to house a twin diaphragm 1” capsule and all the top grade electronics and switches. This flat, round edged chassis design allow the mic to be used flat onto a drumhead or guitar cab, or pushed through into the skin of a kick drum. It is also perfect for sung vocals and voice over work, because although it’s the smallest mic of it’s type, it still ‘looks’ big when used full face on. It is extremely thin at less than 3/4” and fits neatly in the palm of your hand.

 

sE4400a has a unique, black, non-reflective, non-marking, rubberised finish which is ideal for live stage, theatre, TV and broadcast applications which require lighting.


Finally, the capsule has been specially tuned after almost 2 years of pre-market tests with professional studios and broadcasters, to really be something that very few mics can; the true all-rounder. Vital in professional studio or broadcast applications where an engineer needs to know he can reach for a mic that will handle any job, and equally for the home studio user who is on a budget and needs one mic to suit every occasion. The mic is multi-functional yet uncluttered, the sound is smooth and flattering and yet, because the capsules are hand made (like all sE mics) and then individually tuned, it benefits from lacking the usual hyped top end of most modern mass produced mics from automated machines.

It comes with a unique shock mount which allows you to fit the mounted mic into tiny spaces, or invert the shock clamp to extend the mic fully outside the shock mount for close mic-ing applications or vocals. It also comes with a full, steel re-enforced, black aluminium, signature sE flight case.

 

More Information
Specifications Microphone Response :20Hz-20KHz,
Microphone Maximum SPL : (0.5% THD@1000Hz): 130dB,
Microphone Impedance : 200 ohms,
Microphone Powering : Phantom power 48V±4V,
5 mA,
Microphone Max Input : 1000mV,
Microphone self Noise : 17dB(A weighted),
Microphone Connector : 3-pin XLR Male,
Microphone Dynamic Range : 106 dB,
Microphone Signal-to-Noise : 69/68/69 dB1,
Microphone sensitivity : 14.1mv/pa-37db ± 1dB,
57mm L X 29mm W X 143mm H,
Physical Weight : 280g
Write Your Own Review
You're reviewing:SE Electronics 4400a Condenser Mic
Your Rating
4400A_Manual (222.83 kB)