Rode NT2-A Large Diaphragm Condenser Microphone
The NT2-A carries on the tradition forged by the legendary RODE NT2. A professional large capsule (1") studio microphone incorporating three-position pick-up patterns, PAD and high pass filter switches conveniently located on the mic body, the NT2-A is at home on an incredibly diverse range of sound sources.
The frequency and transient response of this transducer has been voiced to complement today's modern recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the 50's and 60's. Its superlative audio characteristics combined with the included SM6 shock mount with integrated pop filter, 3m (10') XLR cable and dustcover, make the NT2-A one of the most versatile condenser mics available.
Key Features
- Large 1" (25mm) HF1 gold sputtered capsule
- On body control of polar pattern, HPF and PAD
- Three position variable polar pattern: Omni, Cardioid or Figure 8
- Three position variable High-Pass Filter - Flat, 40Hz or 80Hz
- Three position PAD - 0dB, -5dB or -10dB
- Ultra low noise, transformerless surface mount circuitry
- Wide dynamic range
- Internal capsule shock mounting
- 10 Year Warranty when you register online within one month of purchase, visit www.rodemic.com for details
0
Microphone Capsule: 25mm
Microphone Response: 20 Hz - 20 kHz
Microphone Impedance: 200 Ohms
Microphone Maximum SPL: 147dB SPL (@ 1kHz, 1% THD into 1KOhm load) (157dB with PAD at maximum)
Microphone Signal-to-Noise: 87 dB SPL (A - weighted per IEC651)
Microphone Sensitivity: -36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Microphone Connector: 3 Pin XLR Male
Microphone Diameter: 55mm
Microphone Pad Switches: Yes
Microphone Powering: 24-48V Phantom Power
Physical Height: 209.00mmH x 55.00mmW x 55.00mmD
Physical Weight: 860gm