Wall Box 24+8 Way XLR D Type by Studiospares

Availability: More than 30 in stock

SKU
405730
  • Wall Box 24+8 Way XLR D Type by Studiospares, pre-drilled for cable snakes or wall mounting.
  • All versions are of steel 1.4mm thick, of substantial construction and smart appearance.
  • The boxes are in two parts, a U shaped backplate and a front U shaped section to which the sockets are attached.
  • By first mounting the backplate on the wall, problems of alignment, access to the mounting holes, wiring access etc are totally eliminated.
  • Once mounted, the front panel can be screwed to the backplate. Finish Black stove enamelling for maximum durability.
  • The rear section includes four 6mm holes for wall fixing. 25mm and holes for cable entry are located on the back and lower edge of the socket panel.
  • Dimensions: 265mm Wide x 170mm High x 45mm Deep. The 8+4, 16+8 and 24+8 versions have an extra 38mm cable entry hole on the rear and lower side.
£23.99 £19.99 Save 17%

Inc VAT

- +
Or
Loading payment button...

Wall Box 24+8 Way XLR D Type


**New design - 24 d-type cutouts and 8 smaller holes for 1/4" jack sockets.

Studiospares boxes, the most cost-effective stage box available. Pre-drilled for cable snakes or wall mounting. All versions are of steel 1.4mm thick, of substantial construction and smart appearance. No unsightly mounting holes. The boxes are in two parts, a U shaped backplate and a front U shaped section to which the sockets are attached. By first mounting the backplate on the wall, problems of alignment, access to the mounting holes, wiring access etc are totally eliminated.

Once mounted, the front panel can be screwed to the backplate. Finish Black stove enamelling for maximum durability. The rear section includes four 6mm holes for wall fixing. 25mm and holes for cable entry are located on the back and lower edge of the socket panel.

Dimensions: 265mm Wide x 170mm High x 45mm Deep. The 8+4, 16+8 and 24+8 versions have an extra 38mm cable entry hole on the rear and lower side.

The boxes have pre-drilled D Type holes that can accommodate any standard D Type Chassis, this is an ideal adaptable solution for whatever combination of inputs or outputs you require, be it jack, XLR, Phono, BNC, Firewire, phono, speakon, USB or RJ45.

 

Also Available:

  • 16 x D Type hole + 8 Jack socket holes (11mm) - Code 401381
  • 8 x D Type hole + 4 Jack socket holes (11mm) - Code 401561 4 x D Type hole - Code 403040
  • 2 x D Type hole - Code 403030
  • 1 x D Type hole - Code 403020
  • See associated products below for suitable glands and D Type connectors