Audio-Technica PRO 47T Cardioid Condenser Gooseneck Microphone

Availability: Discontinued

SKU
481190
  • Audio-Technica PRO 47T Cardioid Condenser Gooseneck Microphone.
  • This double-gooseneck cardioid condenser microphone with integral power module and a 5/8''-27 adapter mount.
  • Ideal for boardroom, school, government, house of worship and other installed applications.
  • Featuring a wide-range condenser element with a low-mass diaphragm for superior performance.
  • The microphone's self-contained electronics eliminate the need for external power modules.
Our price £149.00

Inc VAT

Audio-Technica PRO 47T Cardioid Condenser Gooseneck Microphone


This double-gooseneck cardioid condenser microphone with integral power module and 5/8"-27 adapter-mount is ideal for boardroom, school, government, house of worship and other installed applications. Featuring a wide-range condenser element with a low-mass diaphragm for superior performance, the microphone's self-contained electronics eliminate the need for external power modules.

 

Key Features:

  • Wide-range condenser element with low-mass diaphragm for superior performance
  • Self-contained electronics eliminate the need for external power modules
  • Flat, smooth frequency response
  • Quiet, fixed-placement, long-life gooseneck
  • Direct mounts to any 5/8"-27 stand, or to included threaded mounting stud
  • 9.8' (3.0 m) cable permanently attached between microphone and XLRM-type connector
  • Overall length of 12.40" (315.0 mm)
Specification
Specifications
  • ELEMENT: Fixed-charge back plate, permanently polarized condenser
  • POLAR PATTERN: Cardioid
  • FREQUENCY RESPONSE: 70-16,000 Hz
  • OPEN CIRCUIT SENSITIVITY: -37 dB (14.1 mV) re 1V at 1 Pa
  • IMPEDANCE: 100 ohms
  • MAXIMUM INPUT SOUND LEVEL: 134 dB SPL, 1 kHz at 1% T.H.D.
  • DYNAMIC RANGE (typical): 106 dB, 1 kHz at Max SPL
  • SIGNAL-TO-NOISE RATIO: 66 dB, 1 kHz at 1 Pa
  • PHANTOM POWER REQUIREMENTS: 9-52V DC, 2 mA typical
  • WEIGHT: 2.2 oz (63 g)
  • DIMENSIONS: 12.40" (315.0 mm) long, 0.47" (12.0 mm) head diameter
  • OUTPUT CONNECTOR: 3-pin XLRM-type on cable
  • CABLE: 9.8' (3.0 m) cable permanently attached between microphone and XLRM-type connector
  • ACCESSORIES FURNISHED: AT8146 windscreen; AT8425 5/8"-27 threaded mounting stud
  • AUDIO-TECHNICA CASE STYLE: M22