Audio-Technica AT4053b Hypercardioid Condenser Microphone

Availability: Backorder

SKU
405970
  • Audio-Technica AT4053b Hypercardioid Condenser Microphone, with direct-coupled balanced outputs for clean signals in high-output conditions.
  • Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement.
  • Hypercardioid polar pattern reduces the pickup of sounds from the sides and rear, improving isolation of the desired sound source.
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides a superior correlation of high-speed transients.
Our price £459.00

Inc VAT

- +
Or
Loading payment button...

Audio-Technica AT4053b Hypercardioid Condenser Microphone


Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).

 

Key Features:

  • Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement.
  • Hypercardioid polar pattern reduces the pickup of sounds from the sides and rear, improving isolation of the desired sound source.
  • Direct-coupled, balanced output results in a clean signal even under high-output conditions.
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides a superior correlation of high-speed transients.
  • Switchable 80 Hz hi-pass filter and 10 dB pad.
  • Rugged turned-brass microphone housing for enduring dependability.
  • State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards.
  • RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).
Specification
Specifications
  • ELEMENT: Externally polarized (DC bias) capacitor
  • POLAR PATTERN: Hypercardioid
  • FREQUENCY RESPONSE: 20-20,000 Hz
  • LOW-FREQUENCY ROLL-OFF: 80 Hz, 18 dB/octave
  • OPEN CIRCUIT SENSITIVITY: -34 dB (19.9 mV) re 1V at 1 Pa
  • IMPEDANCE: 50 ohms
  • MAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
  • NOISE: 16 dB SPL
  • DYNAMIC RANGE (typical): 129 dB, 1 kHz at Max SPL
  • SIGNAL-TO-NOISE RATIO: 78 dB, 1 kHz at 1 Pa
  • PHANTOM POWER REQUIREMENTS: 48V DC, 4.8 mA typical
  • SWITCH: Flat, roll-off; 10 dB pad (nominal)
  • WEIGHT: 127g
  • DIMENSIONS: 155.0 mm (6.10") long, 21.0 mm (0.83") maximum body diameter