Price Match

Excellent Support

Rated 9.5 / 10

Free Delivery
Over £99

Finance Options

  1. Home
  2. Accessories
  3. Test Gear
  4. Studiospares UCT2 Ultimate Cable Tester
Alternative Image
Studiospares UCT2 Ultimate Cable Tester
Alternative Image 1
Alternative Image 2
Alternative Image 3

Studiospares UCT2 Ultimate Cable Tester

Product Code: 459180

Cable testing has never been easier with the Studiospares UCT2 Ultimate Cable Tester

£29.00 (INC VAT) WAS: £34.50 SAVE: £5.50
52 In StockOrder by 3pm for express delivery options
Add to Basket Add to Wishlist Print Check out Finance Options here
Delivery Icon

Price Match

We'll match or beat any price

Price Icon

Free Delivery

On Orders over £99 (INC VAT)

  • Description
  • Specifications
  • Reviews
  • Downloads

Studiospares UCT2 Ultimate Cable Tester

Broken or intermittent cables are the bane of every engineer's life. It has become industry best practice to always test cables before your big session, and the UCT2 Ultimate Cable Tester helps get the job done quickly and efficiently. Simply plug each end of the cable in and watch the LED readout. The all metal construction makes this product hard wearing, suitable for a roadie tool case or the studio.

Tested in our Cable Workshop
We have been using the UCT2 Cable Tester in our own cable making workshop here in NW London for several months, putting it to good use testing the thousands of professional Neutrik leads made on our premises every month.

There are two banks of connectors, one to the left and the other to the right. They are spread along the top surface and down each side.

Two parallel rows of 8 Red and 8 Green LEDs are adjacent running across the middle of the unit. The Red LEDs show which pin is under investigation and the Green LED below lights to confirm a connection exists.

There are two modes of testing, Manual and Automatic. In Manual mode pushing the buttons either side of the On-Off switch moves the pin to be tested either up or down. The unit defaults to pin 1 when switching on. In Auto Mode the UCT2 scans from pin 1 upwards to pin 8. The complete scan takes four seconds.

For example if pin 1 Red causes pin 1 Green to ignite then all is OK. If however Green pin 3 illuminates then pin 1 and 3 are joined.

Facilites and Pin Connections

  • XLR 1= Ground 2= Hot/+ 3= Negative/-
  • Jack/TRS. 1= Sleeve. 2= Tip 3= Ring
  • Mini Jack 3.5mm. 1= Sleeve. 2= Tip 3= Ring
  • Phono - Phono
  • 4pin Speakon/Speakloc 1= +1 2= -1 3= +2 4=-2
  • 8 pin Speakon/Speakloc 1= +1 2= -1 3= +2 4=-2 5= +3 6= -3 7= +4 8= -4
  • S-Video 1= Ground (Y) 2= Ground (C) 3= Y 4= C
  • USB A to USB B
  • MIDI - MIDI 5 pin
  • 8 pin DIN - 8 pin DIN
  • RJ-45 Data. 1= TX_D1 2= TX_D1 3= RX-D2 4= BI-D3+ 5= BI-D3 6= RX-D2 7= BI-D4 8= MBL-D4

Rubber feet to protect surfaces. 

Convenient carying handle.

Buy the UCT2 with batteries - Code 459182

Physical Height: 235 mm
Physical Width: 120 mm
Physical Depth: 40 mm
Customer Reviews

There are no product reviews for this product, why not submit one?


You may also like