Alternative Image
Securack 2U
Alternative Image 1
Alternative Image 2

Securack 2U

Product Code: 406121

As the name implies, Securerack provides security against pilfering and holds equipment securely within a rack.

£14.90 (INC VAT) WAS: £18.90 SAVE: £4.00
20 In StockOrder by 3pm for express delivery options
Add to Basket Add to Wishlist Print

Price Match

We'll match or beat any price

Free Delivery

On Orders over £99 (INC VAT)

  • Description
  • Reviews

As the name implies, Securerack provides security against pilfering and holds equipment securely within a rack. If security against equipment theft is high, then attach this product to the rack using the studiospares Security Headed Rack screws, code 401880 and the specialised Allan key code 401890. This product is designed to be versatile, even to accommodate odd shaped equipment. It is based on 1.5mm steel unlike the 1.1mm thickness of other products. The finish is Black semi gloss powder coating which is more expensive but maintains it’s looks even with heavy use.

Secureracks occupies 2U, 3U or 4U of rack space being a popular method of securing free standing equipment into a Rack Tray. Two `over bars` whose height and position can be varied, bear down on the equipment and clamp it in position. The rear bar can be swiveled to be positioned behind the equipment to prevent it falling back over the rear edge of the tray, particularly relevant when front panel buttons are being pushed. Maximum equipment width is 429mm. Please note that since the equipment`s facia panel is not generally in contact with the clamping mechanism the equipment`s facia panel can be up to 435mm wide or any width if it protudes out of the front of the rack. The tray depth is 300mm.

Clamping Bars.
If one clamping bar is used to bear down on the equipment, the second clamping bar can be set to stop the equipment being pushed backwards should a user push equipment buttons too vigorously. The distance between the racks open front and rear bar is between 20 and 270 mm. If both bars are used to clamp down on the equipment then the equipment’s depth can be 500mm. (Check that the 300mm depth still supports the equipment`s four feet). Self adhesive rubberised plastic strips can be attached to the clamping bars to cover any situation. These Studiospares versions have V shaped bars which remain rigid. Other racks use clamping bars with flat strips of metal which easily bend to become useless.

This is a substantial and well thought out product which covers a variety of uses.

Customer Reviews
  • Verified Customer
    on 06 March 2014
    Used to hold four Trantec radio mic receivers. Sadly both racks had bent edges on arrival (straightened with a vice) & the glue on the self adhesive protective pads had dried out. However, the over bars are lot easier than drilling screw holes to retain the radios!
  • Verified Customer
    on 10 May 2013
    I used one of these to secure three radio mic receivers (with room for a fourth) in a new church sound/video installation. The securack is sturdy but of little more use than a tray. The clamping bars don't really achieve much as they are bowed and don't have any useful adjustment. It is, of course, difficult to mount equipment that isn't rack width and without lugs. However, in future I would look for a simple tray and drill holes in the base or sides to line up with any available tapped holes in the equipment

You may also like