1. Home
  2. Accessories
  3. Cases - Rack
  4. Trojan Black MkII 4U ABS Rack Case
Alternative Image
Trojan Black MkII 4U ABS Rack Case
Alternative Image 1
Alternative Image 2

Trojan Black MkII 4U ABS Rack Case

Product Code: 458620

Following the success of the Trojan ABS MKI Cases we now introduce an updated version with three revisions...

£57.84 (INC VAT)
6 In StockOrder by 3pm for express delivery options
Add to Basket Add to Wishlist Print

Price Match

We'll match or beat any price

Free Delivery

On Orders over £99 (INC VAT)

  • Description
  • Reviews


Designed to ensure that equipment arrives at its destination in good shape.

Following the success of the Trojan ABS MKI Cases we now introduce an updated version with three revisions.

1. For increased strength the case thickness is increased from 2.5mm to 3mm.
2. Drawbolt tension is more consistent with the inclusion of tension springs.
3. Discolouration of the aluminium extrusions corners is solved by plating the aluminium AFTER it is bent through 90 degrees.

These ABS cases have rackstrip BOTH ENDS. Bracing is moulded into the body and lids to provide added rigidity. A gasket is sunk into the edge of the lid. This is compressed by a lip on the body to form a tight seal against dirt and liquids. Drawbolt locks are fitted to make the lid shut tight. Cases may be stacked without sliding off. Corners are strengthened by metal plates to form the anchoring point for the equipment. The equipment mounting strip is threaded (M5) so it is impossible to lose caged nuts. Case length is 550mm which is slightly longer than most. Plugs can therefore remain permanently connected during transit. The distance between rackstrips is 480mm. We purchase by the container load and sell directly to the end user so our prices will always be lower than competitors. Purchasing direct from Studiospares cuts one step out of the distribution chain, where each step increases the price.
4U ABS case weight 6.2kg


  • Hieght: 230mm
  • Width: 550mm
  • Depth: 480mm
Customer Reviews
  • Verified Customer
    on 13 October 2013
    Bose eq and Behringer inuke 3000 in 4 unit case. inuke handles project quite a way out. Covers on case acommadate these well. Other brands do not.
  • Verified Customer
    on 08 July 2013
    I have a Cisco networking lab consisting of two 2611XM routers, a 2950 Catalyst switch and a 2520 frame-relay switch. Was a bit tricky getting the screws to align with two of the routers, but eventually I got them in with a bit of perseverance. Now I can keep my kit nice and tidy and easily transport to the office if necessary. It's a bit bulky, but it's worth it if it keeps your kit in good condition! Highly recommended.
  • Verified Customer
    on 16 May 2012
    Given its appearance in the photo I was concerned that it would be the same as the SKB equivalent. Fortunately its not - its better, primarily because the handles protrude more so carrying it is pain free. It lightweight but appears sturdy enough. It would be better with full-size simmons catches on the lids. Time will tell...