AURALEX FOAMTAK SPRAY ADHESIVE x1 CAN An adhesive for mounting acoustic foam products that will not oxidize Auralex acoustic foams. Can be applied lightly for easy foam removal. Full information on the 2 Auralex adhesives below: AURALEX TUBETAK PRO LIQUID/ FOAMTAK SPRAY ADHESIVES Tubetak Pro Liquid Adhesive is a super-strong, water-based adhesive that comes in a tube and applies easily with a standard caulking gun. Provides a permanent bond and 1 tube mounts up to 2.9 square metres (32 square feet) of foam or diffusors, depending on thickness. Auralex guarantee that Tubetak Pro will not oxidise Auralex foam products. Code 461-660 Foamtak Spray Adhesive is the fastest and easiest way to mount Auralex foam products. Unlike Tubetak Pro, which is more permanent and tougher to remove later, Foamtak can be applied lightly so that your foam is removable, or it can be applied heavily for a more permanent bond. Also guaranteed not to oxidise Auralex acoustic foams. Not suitable for use with MetroFusors or DST-Rs. Mounts up to 8.7 square metres (96 square feet) per can depending on foam thickness. Code 461-650
Please note that due to Royal Mail regulations we are unable to send any Aerosol products by Letter Post. If you purchase this item and select Letter Post at the checkout stage, your order will be delayed while we obtain additional payment for sending via a parcel company. Therefore we ask you to please select 'Standard' or 'Express' delivery instead.