Secure Rack provides security against pilfering and holds equipment securely within a rack.
This product is designed to be versatile, and be able to accommodate odd-shaped equipment. It is based on 1.5mm steel unlike the 1.1mm thickness of other products. The finish is Black semi-gloss powder coating which is more expensive but maintains its looks, even with heavy use.
Secureracks occupying 2U, 3U or 4U of rack space is a popular method of securing freestanding equipment into a Rack Tray. Two 'over bars' bear down on the equipment and clamp it in position. The maximum equipment width is 429mm. Please note that since the equipment's facia panel is not generally in contact with the clamping mechanism the equipment's facia panel can be up to 435mm wide or any width if it protrudes out of the front of the rack. The tray depth is 300mm.
If one clamping bar is used to bear down on the equipment, the second clamping bar can be set to stop the equipment from being pushed backwards should a user push equipment buttons too vigorously. The distance between the racks open front and rear bar is between 20 and 270 mm. If both bars are used to clamp down on the equipment then the equipment’s depth can be 500mm. (Check that the 300mm depth still supports the equipment's four feet).
Self-adhesive rubberised plastic strips can be attached to the clamping bars to cover any situation. These Studiospares versions have V-shaped bars that remain rigid. Other racks use clamping bars with flat strips of metal which easily bend to become useless.
This is a substantial and well thought out product that covers a variety of uses.