Studiospares - DBX 223 STEREO CROSSOVER

[ home]

request catalogue

quick order

my account

FORUMS

CHECKOUT

you have zero items, costing £0.00 inc vat

MEDIA & BOOKS

MICROPHONES

HEADPHONES & SPEAKERS

STANDS

EFFECTS & AMPS

DJ EQUIPMENT

RECORDERS & MIXERS

COMPUTER ZONE

CABLE & CONNECTORS

LEADS & LOOMS

RACKS & HARDWARE

ACOUSTICS

EDUCATION

SPECIAL OFFERS

CLEARANCE PRODUCTS

FUTURE PRODUCTS

NEW PRODUCTS

Click for our latest CATALOGUE

DBX 223 STEREO CROSSOVER

Product Code: 379170

Our price:	£99.70 ex VAT
	£117.14 inc VAT

Stock: In Stock

Click to enlarge

Quantity:

Product Price Breaks

Buy 2 items or more price per item £96.20 ex VAT (£113.04 inc VAT)

Description

Further Details

DBX 223 STEREO CROSSOVER   Let's take a look at the construction features of the dbx 223. At first  glance, you'll notice the units are great looking. As you turn the  controls something else becomes apparent; these units are extremely well  built. The controls exude great precision, and the feel is a solid  "click". Also, when you open the box, you won't find the external power  supply that accompanies most processors in this price range. That's  because we know how difficult external power supplies can be to work with  and even though it costs a little more we put the high quality power  supply right in the unit. All the inputs and outputs are TRS  differentially balanced 1/4" jacks that are bolted down to the chassis.  This "nutting down" of the jacks insures that even if someone stomps on a  cable plugged into the unit, it's not going to tear up the circuit board  inside. All dbx crossovers all feature Linkwitz-Riley 24dB per octave  filters, the professional standard. But then again, what did you expect?   Via a switch on the back panel, you first select whether you're operating  your system in stereo 2-way or mono 3-way. Then you also set, on the back  panel, whether or not you want to mono sum the LF (subwoofer) out. (Most  systems that use a subwoofer are mono subbed to take advantage of  amplifier power and because low frequencies are non-directional.) Back  panel switches allow you to select the range of the crossover frequencies  individually for both channels. The crossover frequency controls have a  green LED that indicates when the x10 switch on the back panel is  activated (we wouldn't make you check the switch position on the back  every time you wonder where it's set). All these switches are on the back  panel because it could be disastrous if you were to change them  mid-program. On the front panel you'll notice there are LEDs that  indicate whether the unit is in mono or stereo mode. Each channel has an  input gain control for proper level setting. There's a recessed 40 Hz low  cut (HPF) on each channel to remove unwanted low frequencies. Both the  low and high outputs on each channel have a gain control ranging from -  to +6 dB to allow muting of individual outputs and for level matching.  Also, these outputs each have phase reverse switches that will help get  you out of a bind without having to reconfigure your system. These phase  reverse switches may be internally reconfigured as mute switches.   You'll get great performance, all the features you'd expect from a  professional product and the knowledge that you're buying a processor  from the people that have been producing the worlds finest processors for  over 20 years. The technology that made us famous brings you a dbx  crossover that has been tested to the highest professional standards at a  price that's just too low to admit!