Home > Leads, Looms & Snakes > Snakes > Studiospares Snakeplus XX12415 12/4 XLR/XLR 15m
This product is built to a standard and not a price. Imported by the container load and sold directly to the end user...
Product Code: 590010
Studiospares Snakeplus Series
Please note, the main image above shows the 16 x XLR + 4 Jack returns version and is for reference only.
Most cable snakes have a hard life including the connectors. A bent case will not stop a gig but a dud connector can. This series combines the proven reliability of the existing cable and case and adds the reliability of Neutrik to the product. Steel mesh cable protectors grip the cable like a limpet immediately the cable is pulled. Another protector close to the connector end allows the weight of the cable to be taken off the plugs at the back of the mixer avoiding strain on the mixer sockets. Comfortable freely rotating carrying handle.
A Tails Protector stops the tails splitting the heatshrink when under stress. This product is built to a standard and not a price. Imported by the container load and sold directly to the end user.
Tails strain relief mesh support.
![]() | ![]() |
Please note all XLR connectors are from Neutrik Ningbo. Versions using four Jack sockets for returns use Jack sockets which are currently not of Neutrik origin.
Available in the following length and i/o configurations.
XLR Returns
8 x XLR inputs and 4x XLR returns 15m Code 590000
12 x XLR inputs and 4x XLR returns 15m Code 590010
16 x XLR inputs and 4x XLR returns 30m Code 590020
24 x XLR inputs and 4x XLR returns 30m Code 590030
16 x XLR inputs and 8x XLR returns 30m Code 590040
24 x XLR inputs and 8x XLR returns 30m Code 590050
Jack Returns
8 x XLR inputs and 4x Jack returns 15m Code 590060
12 x XLR inputs and 4x Jack returns 15m Code 590070
16 x XLR inputs and 4x Jack returns 30m Code 590080
24 x XLR inputs and 4x Jack returns 30m Code 590090
16 x XLR inputs and 8x Jack returns 30m Code 590100
24 x XLR inputs and 8x Jack returns 30m Code 590110
£79.00 + VAT
€94.01
£94.20 + VAT
€112.09
£14.20 + VAT
€16.89
£10.75 + VAT
€12.79
£99.70 + VAT
€118.64
£93.62
€111.40
£4.12
€4.90
£2.83
€3.36
£21.40
€25.46
£5.89
€7.00
We have been asked many times by customers how the RED100 compares to the sE Reflexion filter, we gave one of each to Mark Davies, an independent Producer/Engineer to test and send us back the results, below is his response.
SE Electronics Reflexion Filter vs Studiospares RED 100
So how does the RED 100 compare to the SE Reflexion Filter despite it being less than half the price?
I recently did some tests in my notoriously difficult studio. The same singer, mic, pre-amp and convertors were used to keep everything on a level playing field. After the recording lots of compression was applied, the same amount on all of the files so that the differences is a bit more noticeable.
Setting up: The SE filter features a complex mechanism to attach the filter to the mic stand which took a good 20 minutes to figure out and put in place, having no instructions to hand!. However, the RED100 was on and secure in minutes. Also, whilst the Reflextion filter is a fixed shape, the RED100 is hinged at the middle allowing you to vary the 'size' of the space. This could also prove useful for instrument recording.
The results: There are three audio files (below) which are recordings with no filter, Reflextion Filter and the RED100. The recording with no filter shows up the thin, 'glassy' sound of the room. Interestingly however, both the Reflextion Filter and RED100 sound almost identical.
Conclusion: It is hard to justify spending over twice the money on the Reflexion Filter, even though it is a slightly sturdier construction. The setup time, adjustability and ease of portability of the RED100 make this an easy decision.
Audio Files -
sE Electronics Reflexion Filter
Product Links -
sE Electronics Reflexion Filter - Product Code 422110

Studiospares RED100 - Product Code 465160
Click here to send a Gift Certificate. The perfect gift when you don't know what to buy them.
