The follow-up to the Tascam US-122, Record four tracks at a time and monitor them with zero latency. PC or a Mac compatible. Compact yet packed with features. High quality mic inputs, digital SPDIF input and output, MIDI input and output, 96kHz/24-bit recording. Main Features * Two XLR mic inputs with phantom power * Digital audio input and output (SPDIF, coaxial) * Two analog line inputs (one switchable to high impedance for use with guitars, basses, etc.) * One MIDI input, one MIDI output * USB 2.0 equipped (also supports USB 1.1) * Up to 96kHz/24-bit for high quality recordings * Zero-latency hardware monitoring * Seperate controls for output level and headphone volume * Bus powered for use with any PC or Mac, including laptops * Cubase LE and GigaStudio 3 LE included Driver support for - Windows XP and Vista (not 64-bit versions), Mac OS10.4, OS10.5.

Specifications Analogue inputs and outputs Mic inputs (MIC IN L and R) XLR, balanced Input impedance 2.4 kOhm Nominal input level ?58 dBu (TRIM=max) to ?14 dBu (TRIM=min) Maximum input level +2 dBu (TRIM=min) Line inputs (LINE IN L and LINE/GUITAR IN R, MIC/LINE position) 6,3-mm jack, unbalanced Input impedance 10 kOhm Nominal input level ?40 dBu (TRIM=max) to +4 dBu (TRIM=min) Maximum input level +20 dBu (TRIM=min) Guitar input (LINE/GUITAR IN R, GUITAR position) 6,3-mm jack, unbalanced Input impedance 1 MOhm Nominal input level ?51 dBu (TRIM=max) to ?7 dBu (TRIM=min) Maximum input level +9 dBu (TRIM=min) Line output (LINE OUT) RCA, unbalanced Output impedance 100 Ohm Nominal output level ?10 dBV Maximum output level +6 dBV Phones output (PHONES) 6.3-mm stereo jack Maximum output power 14 mW + 14 mW (32 Ohm) Digital input and output Digital input (DIGITAL IN) RCA (Koaxial) Nominal level 0.5 Vpp (75 Ohm) Format IEC 64958 (SPDIF) Digital output (DIGITAL OUT) RCA (coaxial) Nominal level 0.5 Vpp (75 Ohm) Format IEC 64958 (SPDIF) or AES3-1992 (AES/EBU) Audio performance A/D Conversion (AK5381) 24-bit/96 kHz, 27.6 samples delay D/A Conversion (AK4384) 24-bit/96 kHz, 19.3 samples delay Frequency response (LINE OUT, ?10 dBV) 20 Hz ? 20 kHz, 1 dB (normal sampling rate up to 48 kHz) 20 Hz ? 40 kHz, +1/?3 dB (high sampling rate up to 96 kHz) Signal-to-noise ratio, LINE IN to LINE OUT Through ADC and DAC >96 dB(A) (INPUT = min, input impedance 40 Ohm) Through direct monitor >100 dB(A) (INPUT = min, input impedance 40 Ohm) Total harmonic distortion (THD+N, 22 Hz to 22 kHz), LINE IN to LINE OUT